NDS3150 - NVM DIRECT DRIVE - 150nm - 3 phase Electronic Limits - 25.4mm Shaft - 24rpm - pre-wired CONTROL PANEL (Brand: North Valley Metal)

North Valley Metal NDS3150 - NVM DIRECT DRIVE - 150nm - 3 phase Electronic Limits - 25.4mm Shaft - 24rpm - pre-wired CONTROL PANEL (Brand: North Valley Metal) NDS3150 - NVM DIRECT DRIVE - 150nm - 3 phase Electronic Limits - 25.4mm Shaft - 24rpm - pre-wired CONTROL PANEL (Brand: North Valley Metal)

NDS3150 - NVM 150nm DIRECT DRIVE - 3 ph -  Electronic Limits - 25.4mm Shaft - 24rpm - with pre-wired NDC511 CONTROL PANEL & CABLES

 

Pre-Wired Options

  • NDS3150A - NDS3150E - 150nm Direct Drive Operator - NDC501 Control Panel pre-wired with 5 Metre Cables
  • NDS3150B - NDS3150E - 150nm Direct Drive Operator - NDC501 Control Panel pre-wired with 7 Metre Cables
  • NDS3150C - NDS3150E - 150nm Direct Drive Operator - NDC501 Control Panel pre-wired with 11 Metre Cables

NDS3150E - 150nm DIRECT DRIVE

Features:

  • Low Level De-Clutch
  • Low Level Manual Over-ride & Haul Chain
  • Electronic Limits
  • Built In Encoder
  • Built In Antifall Back
  • Assembled & Tested in thr UK
  • Comes with; as standard
    • Mounting bracket  
    • Fixings
    • Keyway
    • Collars

Technical Details

  • Operation temp; -20 Degrees  - + 45 Degrees
  • Max Turns – 20
  • Max run time – 25 MINS
  • Output torque – 150NM
  • Output speed – 24 RPM
  • Output current – 2.92 Amps
  • Motor Power – 650 Watts
  • Power supply - AC380 -415V/50HZ
  • Chain operated Spring loaded - Manual override
  • Thermal cut off
  • Safety circuit protection on override
  • Electronic limits – KOSTAL ENCODER
  • Suits 25.4mm shaft

NDC501 CONTROL PANEL

Functionality as standard;

  • 3ph – 2.2kw
  • Compatible with both Opto and 8.2K resistive safety edges.
  • Suitable for both MECH – ELEC Limits.
  • Volt Free – N/O Manual switching capability.
  • 3 button Up,Down,Stop on front cover.
  • Photocell compatible.
  • Independent n/c safety circuits
  • Easily programable limits from low level; (if ELEC)
  • Deadman – semi auto or auto running programmable through DiP Switch.
  • LED Safety Indicators and LED Error Indication.
  • Additional extras;
    • Induction loop module
    • Receiver and Transmitters
    • Bluetooth Module for Easy Programming

NDC151 / NDC152 CABLES

  • 1.5mm 7 Core YY
  • 1.0mm 7 Core YY
  • 20mm Grommets
  • 20mm Nuts
  • Connectors
  • Cables prepped 5 Metre, 7 Metre, 11 Metre

Available Options:

  • Can be supplied as Drive Operator onlyPre-wired with NDC511 Control Panel in 5m / 7m / 11m  Cable Lengths
  • As complete kit including Direct Drive Operator, Pre-Wired Control Panel, Endplate Kit.with Plates, Footmount and all accesories.
  • Flange Adaptor 
  • Direct Drive Operator & Panel sold separately
0.00 In Stock
Availability:
In Stock
Product Code:
NDS3150
Brand:
North Valley Metal

Not yet rated Write a review

Description

NDS3150 - NVM 150nm DIRECT DRIVE - 3 ph -  Electronic Limits - 25.4mm Shaft - 24rpm - with pre-wired NDC511 CONTROL PANEL & CABLES

 

Pre-Wired Options

  • NDS3150A - NDS3150E - 150nm Direct Drive Operator - NDC501 Control Panel pre-wired with 5 Metre Cables
  • NDS3150B - NDS3150E - 150nm Direct Drive Operator - NDC501 Control Panel pre-wired with 7 Metre Cables
  • NDS3150C - NDS3150E - 150nm Direct Drive Operator - NDC501 Control Panel pre-wired with 11 Metre Cables

NDS3150E - 150nm DIRECT DRIVE

Features:

  • Low Level De-Clutch
  • Low Level Manual Over-ride & Haul Chain
  • Electronic Limits
  • Built In Encoder
  • Built In Antifall Back
  • Assembled & Tested in thr UK
  • Comes with; as standard
    • Mounting bracket  
    • Fixings
    • Keyway
    • Collars

Technical Details

  • Operation temp; -20 Degrees  - + 45 Degrees
  • Max Turns – 20
  • Max run time – 25 MINS
  • Output torque – 150NM
  • Output speed – 24 RPM
  • Output current – 2.92 Amps
  • Motor Power – 650 Watts
  • Power supply - AC380 -415V/50HZ
  • Chain operated Spring loaded - Manual override
  • Thermal cut off
  • Safety circuit protection on override
  • Electronic limits – KOSTAL ENCODER
  • Suits 25.4mm shaft

NDC501 CONTROL PANEL

Functionality as standard;

  • 3ph – 2.2kw
  • Compatible with both Opto and 8.2K resistive safety edges.
  • Suitable for both MECH – ELEC Limits.
  • Volt Free – N/O Manual switching capability.
  • 3 button Up,Down,Stop on front cover.
  • Photocell compatible.
  • Independent n/c safety circuits
  • Easily programable limits from low level; (if ELEC)
  • Deadman – semi auto or auto running programmable through DiP Switch.
  • LED Safety Indicators and LED Error Indication.
  • Additional extras;
    • Induction loop module
    • Receiver and Transmitters
    • Bluetooth Module for Easy Programming

NDC151 / NDC152 CABLES

  • 1.5mm 7 Core YY
  • 1.0mm 7 Core YY
  • 20mm Grommets
  • 20mm Nuts
  • Connectors
  • Cables prepped 5 Metre, 7 Metre, 11 Metre

Available Options:

  • Can be supplied as Drive Operator onlyPre-wired with NDC511 Control Panel in 5m / 7m / 11m  Cable Lengths
  • As complete kit including Direct Drive Operator, Pre-Wired Control Panel, Endplate Kit.with Plates, Footmount and all accesories.
  • Flange Adaptor 
  • Direct Drive Operator & Panel sold separately

Share

Reviews (0)

Write a review