ND3350E - NVM DIRECT DRIVE - 350nm - 3 phase Electronic Limits - 40mm Shaft - 12rpm (Brand: North Valley Metal)

North Valley Metal ND3350E - NVM DIRECT DRIVE - 350nm - 3 phase Electronic Limits - 40mm Shaft - 12rpm (Brand: North Valley Metal) ND3350E - NVM DIRECT DRIVE - 350nm - 3 phase Electronic Limits - 40mm Shaft - 12rpm (Brand: North Valley Metal)

ND3350E - NVM DIRECT DRIVE - 350nm - 3 phase Electronic Limits - 40mm Shaft - 12rpm

Features:

  • Low Level De-Clutch
  • Low Level Manual Over-ride & Haul Chain
  • Electronic Limits
  • Built In Encoder
  • Built In Antifall Back
  • Assembled & Tested in the UK

Technical Details

  • Operation temp; -20 Degrees  - + 45 Degrees
  • Max Turns – 20
  • Max run time – 25 MINS
  • Output torque – 350NM
  • Output speed – 12 RPM
  • Output current – 3.5 Amps
  • Motor Power – 1000 Watts
  • Power supply - AC380 -415V/50HZ
  • Chain operated Spring loaded - Manual override
  • Thermal cut off
  • Safety circuit protection on override
  • Electronic limits – KOSTAL ENCODER
  • Suits 40mm shaft

Availability Options:

  • Can be supplied as Direct Drive Operator only
  • Pre-wired with NDC511 Control Panel in 5m / 7m / 11m  Cable Lengths
  • As complete kit including Direct Drive Operator, Pre-Wired Control Panel, Endplate Kit.with Plates, Footmount and all accesories.
0.00 In Stock
Availability:
In Stock
Product Code:
ND3350E
Brand:
North Valley Metal

Not yet rated Write a review

Description

ND3350E - NVM DIRECT DRIVE - 350nm - 3 phase Electronic Limits - 40mm Shaft - 12rpm

Features:

  • Low Level De-Clutch
  • Low Level Manual Over-ride & Haul Chain
  • Electronic Limits
  • Built In Encoder
  • Built In Antifall Back
  • Assembled & Tested in the UK

Technical Details

  • Operation temp; -20 Degrees  - + 45 Degrees
  • Max Turns – 20
  • Max run time – 25 MINS
  • Output torque – 350NM
  • Output speed – 12 RPM
  • Output current – 3.5 Amps
  • Motor Power – 1000 Watts
  • Power supply - AC380 -415V/50HZ
  • Chain operated Spring loaded - Manual override
  • Thermal cut off
  • Safety circuit protection on override
  • Electronic limits – KOSTAL ENCODER
  • Suits 40mm shaft

Availability Options:

  • Can be supplied as Direct Drive Operator only
  • Pre-wired with NDC511 Control Panel in 5m / 7m / 11m  Cable Lengths
  • As complete kit including Direct Drive Operator, Pre-Wired Control Panel, Endplate Kit.with Plates, Footmount and all accesories.

Share

Reviews (0)

Write a review