Remote Control for Doors, Entrance Systems and Gates

HSD102 - Transmitter 4 Channel for Ditec High Speed Doors

HSD102 - Transmitter 4 Channel for Ditec High Speed Doors

HSD102 - Transmitter 4 Channel for Ditec High Speed Doors 433MHz, 4 Channel, Sequential...

View More
HSD102B - Transmitter 4 Channel Industrial Type for Ditec High Speed Doors

HSD102B - Transmitter 4 Channel Industrial Type for Ditec High Speed Doors

HSD102B - Transmitter 4 Channel Industrial Type for Ditec High Speed Doors 433Mhz Supplied in Metal Casing IP55 Rating...

View More
HSD102C - Wall Mounting Case for HSD102R

HSD102C - Wall Mounting Case for HSD102R

HSD102C - Wall Mounting Case for HSD102R Card Holding Base for Internal / External installation...

View More
HSD102R - 2 Channel Receiver Expansion Card for Ditec High Speed Doors

HSD102R - 2 Channel Receiver Expansion Card for Ditec High Speed Doors

HSD102R - 2 Channel Receiver Expansion Card for Ditec High Speed Doors 433Mhz, 12-24vdc pcb For connection to the Control board or Card holding Base...

View More
NDC3* - NICE Expansion Cards for Direct Drives

NDC3* - NICE Expansion Cards for Direct Drives

​NDC301 - Expansion Card K1 to suit UST1 Additional module for the UST1 control unit for semi-automatic opening and closing in deadman mode. For gearmotors with mechanical limit switch.   NDC302 - Expansion Card K2 to suit UST1 Additional module for the UST1 control unit for automat...

View More
NDC320 - NICE Receiver - 4 Channel

NDC320 - NICE Receiver - 4 Channel

NDC320 - NICE Receiver - 4 Channel Each Receiver in the OXI ~Range has its secret identification number called Certificate that distinguishes it from any other unit. The Certificate can also programmed on the NDC321 ONE Transmitters.  ...

View More
NDC321 - NICE Transmitter - 4 Button

NDC321 - NICE Transmitter - 4 Button

NDC321 - NICE Transmitter - 4 Button Each Transmitter allows the management of Identity Codes, self-learning and intergrated proximity receiver. With 72-bit O-Code code, also compatible with receivers having the NICE FloR code. The ONE system is also available in 1, 2 & 9 Button Transm...

View More
NDF203 - Remote Control Keyfob Transmitter for Direct Drive Control Panel

NDF203 - Remote Control Keyfob Transmitter for Direct Drive Control Panel

NDF203 - Remote Control Keyfob Transmitter for Direct Drive Control Panel. Features Single Channel Up/Stop/Down Buttons Rolling Code Technology with more than 5 million codes. Chrome Finish ...

View More
NF0010 - Remote Control - c/w 2 Fobs, suit NF100* & NF300* Series In-Line Flange Motors

NF0010 - Remote Control - c/w 2 Fobs, suit NF100* & NF300* Series In-Line Flange Motors

NF0010 - REMOTE CONTROL - c/w 2 Fobs, suit NF100* & NF300* Series Motors Features: N/O Terminal Pre-Wired for Flange Motors 433MHz  ...

View More
NF0010B - Fob Handset, suit NF0010 Remote Control for NF100* & NF300* Series In-Line Flange Motors

NF0010B - Fob Handset, suit NF0010 Remote Control for NF100* & NF300* Series In-Line Flange Motors

NF0010B - Fob Handset, suit NF0010 Remote Control for NF1* & NF3* Series In-Line Motors Features: 433MHz Rolling Code Technology Sliding Cover 30m Range  ...

View More
NGO514 - PLUG IN RECEIVER, 2 Channel, Fixed or Rolling Code for Automatic Gates

NGO514 - PLUG IN RECEIVER, 2 Channel, Fixed or Rolling Code for Automatic Gates

NGO514 - PLUG IN RECEIVER, 2 Channel, Fixed or Rolling Code for Automatic Please specify Fixed or Rolling Code, when ordering...

View More
NGO616 - MINI CONTROL UNIT 230vac RX2H for Automatic Lighting Systems

NGO616 - MINI CONTROL UNIT 230vac RX2H for Automatic Lighting Systems

NGO616 - MINI CONTROL UNIT 230vac RX2H for Automatic Lighting Systems Features:: Suitable for Wireless Lighting Systems, Awnings and Home Control Systems 230v / 110v Ac main voltage loads with power up to 1000w Two independent Channels Easy programming with LED & Buzzer Wil...

View More
NGO617 - PLUG IN RECEIVER (4 CHANNEL), ROLLING CODES RX4X (1pc) for Automatic Gates

NGO617 - PLUG IN RECEIVER (4 CHANNEL), ROLLING CODES RX4X (1pc) for Automatic Gates

NGO617 - PLUG IN RECEIVER (4 CHANNEL), ROLLING CODES RX4X (1pc) for Automatic Gates Part of thge 14A Control Panel Group 24vdc Control Unit "one for all" for 24v Automations: (all sold separately) NGO601 - Control Box with Transformer NGO616 - 4 Channel Plug in Receiver NGO614 - Logic M...

View More
NGO618 - UNIVERSAL RECEIVER 2 CHANNEL (FIXED or 1,000 ROLLING CODES) RMX23X (1pc) for Automatic Gates

NGO618 - UNIVERSAL RECEIVER 2 CHANNEL (FIXED or 1,000 ROLLING CODES) RMX23X (1pc) for Automatic Gates

NGO618 - UNIVERSAL RECEIVER 2 CHANNEL (FIXED or 1,000 ROLLING CODES) RMX23X (1pc) for Automatic Gates Features: Universal Receiver 2 Channel Output Will accept up to 1000 Transmitters Fixed or Rolling Codes 433.92mHz Technical Details: Power: 12-24v Dc Relay contac...

View More
NGO627 - TRANSMITTER, 4 CHANNEL, WHITE, ROLLING CODE for Automatic Gates

NGO627 - TRANSMITTER, 4 CHANNEL, WHITE, ROLLING CODE for Automatic Gates

NGO627 - TRANSMITTER, 4 CHANNEL, WHITE, ROLLING CODE Features: Water Resistant Ergonomic, Simple & Modern design Tri-Injection moulded Chromed Metal Insert Interchangeable Colours   ...

View More
NGO654 - DECODER FOR DIGITAL KEYPAD SEL-D (max 70 codes)

NGO654 - DECODER FOR DIGITAL KEYPAD SEL-D (max 70 codes)

NGO654 - DECODER FOR DIGITAL KEYPAD SEL-D (max 70 codes)  ...

View More
NGO655 - DECODER for PROXIMITY SENSOR TRANSPONDER for Automatic Gates

NGO655 - DECODER for PROXIMITY SENSOR TRANSPONDER for Automatic Gates

NGO655 - DECODER for PROXIMITY SENSOR TRANSPONDER for Automatic Gates  ...

View More
NGO676 - PLUG IN (2 CHANNEL) RMX23X RECEIVER, FIXED or ROLLING CODES (1,000) for Automatic Gates

NGO676 - PLUG IN (2 CHANNEL) RMX23X RECEIVER, FIXED or ROLLING CODES (1,000) for Automatic Gates

NGO676 - PLUG IN (2 CHANNEL) RECEIVER, FIXED or ROLLING CODES (1,000) Features: 2 Channel Will accept either Fixed or Rolling Code Technology Will accept up to 1,000 Transmitters Technical Data: Frequency: 433.92mHz Power: 12-24v Dc Idle Consumption: 44 mA Protection Ra...

View More
NGO677 - UNIVERSAL RECEIVER RXM230-42, 2 CHANNEL (400 FIXED CODE) for Automatic Gates

NGO677 - UNIVERSAL RECEIVER RXM230-42, 2 CHANNEL (400 FIXED CODE) for Automatic Gates

NGO677 - UNIVERSAL RECEIVER RXM230-42 2 CHANNEL (400 FIXED CODE) Features: 2 Channels Fixed Code only Accepts up to 400 Transmitters Technical Data: Frequency: 433.92mHz Power: 230v Ac Idle Consumption: 70 mA Protection Rating: IP44 Operating Temperature: -20 - +...

View More
NGO678 - UNIVERSAL RECEIVER RXM-44R 4 CHANNEL (220 ROLLING CODE) for Automatic Gates

NGO678 - UNIVERSAL RECEIVER RXM-44R 4 CHANNEL (220 ROLLING CODE) for Automatic Gates

NGO678 - UNIVERSAL RECEIVER RXM-44R 4 CHANNEL (220 ROLLING CODE) Features: 4 Channel Rolling Code Technology Accepts up to 220 Transmitters Technical Data: Frequency: 433.92mHz Power: 12-24v Dc Idle Consumption: 70 mA Protection Rating: IP44 Operating T...

View More
NGO70* - Transmitter - Rolling Code, Multi-Channel - Packs of 10 for Automatic Gates

NGO70* - Transmitter - Rolling Code, Multi-Channel - Packs of 10 for Automatic Gates

NGO70* - Transmitter - Rolling Code, Multi-Channel - Packs of 10 Packs of 10 Transmitters NGO702 - TRANSMITTERS - KIT 10 SUB, XR ROLLING CODE, BLUE (10pcs) NGO703 - TRANSMITTERS - KIT 10 SUB, XR ROLLING CODE, GREY (10pcs) NGO704 - TRANSMITTERS - KIT 10 SUB, XR ROLLING CODE, GREEN (10pcs...

View More
NGO701 - TRANSMITTER KEY RING for use with NGO7*

NGO701 - TRANSMITTER KEY RING for use with NGO7*

NGO701 - TRANSMITTER KEY RING for use with NGO7*  ...

View More
NGO71*  - Transmitters for Automatic Gates

NGO71* - Transmitters for Automatic Gates

NGO71*  - TRANSMITTERS for Automatic Gates 4 Channel Transmitters with Rolling Code NGO716 - TRANSMITTERS - 4 CHANNEL, WHITE, ROLLING CODE NGO712 - TRANSMITTERS - 4 CHANNEL, BLACK, ROLLING CODE 4 Channel Transmitter with Sequential Buttons NGO710 - TRANSMITTERS - 4 CHANNEL...

View More
NGO719 - PROGRAMMER FOR XR ROLLING CODE (2015) for Automatic Gates

NGO719 - PROGRAMMER FOR XR ROLLING CODE (2015) for Automatic Gates

NGO719 - PROGRAMMER FOR XR ROLLING CODE (2015) Features: Wireless programming of Transmitters Programming of Receivers Code Visualisation Addition of Transmitters Cancellation of Transmitters Read & Copy of the Receiver Memory on the Palm Programmer and vice versa Remote Rec...

View More
NGO719B - PROGRAMMER FOR XR ROLLING CODE (Pre-2015) for Automatic Gates

NGO719B - PROGRAMMER FOR XR ROLLING CODE (Pre-2015) for Automatic Gates

NGO719B - PROGRAMMER FOR XR ROLLING CODE (Pre-2015) Features: Wireless programming of Transmitters Programming of Receivers Code Visualisation Addition of Transmitters Cancellation of Transmitters Read & Copy of the Receiver Memory on the Palm Programmer and vice versa Remot...

View More
NT1004 - Remote Control / Receiver 10a 230v Ac with Manual Switch Function

NT1004 - Remote Control / Receiver 10a 230v Ac with Manual Switch Function

NT1004 - Remote Control / Receiver 10a 230v Ac with Manual Switch Function Features: ​Plug in terminals Accepts up to 20 Fob Handsets Supplied with 2 x NT1016 KeyFob Transmitters Suitable for Motors with loading capacity up to 1000w Key Fob Compatible Deadman On/Off Function Low...

View More
NT1004W - Remote Control / Receiver 10a 230v Ac with Manual Switch Function, Pre-Wired with Cable & Plug

NT1004W - Remote Control / Receiver 10a 230v Ac with Manual Switch Function, Pre-Wired with Cable & Plug

NT1004W - Remote Control / Receiver 10a 230v Ac with Manual Switch Function, Pre-Wired with Cable & Plug Features: ​Plug in terminals Accepts up to 50 Fob Handsets Supplied with 2 x NT1016 KeyFob Transmitters Suitable for Motors with loading capacity up to 1000w Key Fob Compatib...

View More
NT1005 - Remote Control Group Command 4 Way 230v Ac with Manual Switch Function

NT1005 - Remote Control Group Command 4 Way 230v Ac with Manual Switch Function

NT1005 - Remote Control Group Command 4 Way 230v Ac with Manual Switch Function Features: Standard Terminals 4 way Group Controller for either Individual or Group Control Compaitble with NT1012 & NT1012B Handset, NT1117 Wireless Switch (sold Separately) Manual Switch function...

View More
NT1005B - CAT 5 Cable for NT1005 (6 Metres)

NT1005B - CAT 5 Cable for NT1005 (6 Metres)

NT1005B - CAT 5 Cable for NT1005 (6 Metres) Enables connection of a Standard Key Switch to NT1005 Group Controller. 6 Metres Long Fitted with CAT 5 Plug to one End       ​...

View More
NT1006 - Remote Control / Receiver 10a 230v Ac with Photocell & Manual Switch Functions

NT1006 - Remote Control / Receiver 10a 230v Ac with Photocell & Manual Switch Functions

NT1006 - Remote Control / Receiver 10a 230v Ac with Photocell & Manual Switch Functions Product Codes: NT1006   - ELECTRONIC RECEIVER - Supplied with 2 x NT1016 KEYFOB TRANSMITTERS NT1006B - ELECTRONIC RECEIVER - VOLT FREE (Please note: NOT SUPPLIED WITH NT1016) NT100...

View More
NT1006B - Remote Control / Receiver VOLT FREE, 10a 230v Ac for 3ph Operators

NT1006B - Remote Control / Receiver VOLT FREE, 10a 230v Ac for 3ph Operators

NT1006B - Remote Control / Receiver VOLT FREE, 10a 230v Ac for 3ph Operators NOTE: This Panel is designed to function with a Volt Free connection to 3 Phase Operators via 3 Button Station or like. It cannot connect to a Tube Motor or other Single Phase product. Features: Plug in terminal...

View More
NT1006e - Remote Control / Receiver 10a 230v Ac with Photocell & Manual Switch Functions, Pre-Wired with Cable & Plug

NT1006e - Remote Control / Receiver 10a 230v Ac with Photocell & Manual Switch Functions, Pre-Wired with Cable & Plug

NT1006e - Remote Control / Receiver 10a 230v Ac with Photocell & Manual Switch Functions, Pre-Wired with Cable & Plug Features: Plug in terminals Accepts up to 50 Fob Handsets Supplied with 2 x NT1016 KeyFob Transmitters Suitable for Motors with loading capacity up to 1000w ...

View More
NT1008 - Remote Control / Receiver in IP65 Rated Waterproof Box with Manual Switch Function

NT1008 - Remote Control / Receiver in IP65 Rated Waterproof Box with Manual Switch Function

NT1008 - Remote Control / Receiver 10a 240v Ac in IP65 Rated Waterproof Box with Manual Switch Function Features: Plug InTerminals Accepts up to 20 KeyFob / Wireless Devices Compatible with NT1016, NT1017 KeyFob, NT1117 Switches, NT1012 Handset (Not Included) Suitable for Motors ...

View More
NT1012 - Remote Control Handset Transmitter with Wall Mounting Cradle.

NT1012 - Remote Control Handset Transmitter with Wall Mounting Cradle.

NT1012 - Remote Control Handset Transmitter with Wall Mounting Cradle. Features: Acrylic Face panel for scratch resistance Button Back Lit Mounting Holder for ease of installation No visible Screws. Standard AAA Batteries Supplied with Wall Mounting Cradle Product Codes:...

View More
NT1016 - Remote Control Keyfob Transmitter, Single Channel

NT1016 - Remote Control Keyfob Transmitter, Single Channel

NT1016 - Remote Control Keyfob Transmitter, Single Channel Features: Single Channel Fitted with Replaceable Long Life Lithium Battery Up / Stop / Down Buttons Front Sliding cover to prevent accidental operation of the shutter Chrome Finish Keyfob clip Product Codes: NT1...

View More
NT1017 - Remote Control Keyfob Transmitter Multi-Channel

NT1017 - Remote Control Keyfob Transmitter Multi-Channel

NT1017 - Remote Control Keyfob Transmitter Multi-Channel Features: Four Channel Fitted with Replaceable Long Life Lithium Battery Numbered Sequential Up / Stop / Down / Stop Buttons for each Channel Front Sliding cover to prevent accidental operation of the shutter Chrome ...

View More
NT1018 - Remote Control Handset Transmitter with Wall Mounting Cradle

NT1018 - Remote Control Handset Transmitter with Wall Mounting Cradle

NT1018 - Remote Control Handset Transmitter with Wall Mounting Cradle Features: Acrylic Face panel for scratch resistance Magnetic Mounting Holder for ease of installation No visible Screws. Long Life Battery Supplied with Wall Mounting Cradle Product Codes: NT1018 ...

View More
NT1019 - Remote Control Group Command 4 Way 230v Ac with Remote & Manual Switch Functions

NT1019 - Remote Control Group Command 4 Way 230v Ac with Remote & Manual Switch Functions

NT1019 - Remote Control Group Command 4 Way 230v Ac with Remote & Manual Switch Functions Features: 4 Way Group controller for either Individual or Group Control Compatible with most NVM Keyfob, Handset and SwitchTransmitters Remote Control Function Manual Switch Function for 4 x ...

View More
NT1103 - Intelligent Garage Door Controller with Integral Light, Monitored Safety & Switch Functions

NT1103 - Intelligent Garage Door Controller with Integral Light, Monitored Safety & Switch Functions

NT1103 - Intelligent Garage Door Controller with Integral Light, Monitored Safety & Switch Functions Features: Plug In Terminals Accepts up to 20 Remote Devices Supplied with 2 x NT1016 Keyfob Transmitters Safety Edge Function, with Self-Testing Diagnostics Separate Low Vol...

View More
NT1103A - Remote Control Keyfob Transmitter, Single Channel 866mHz

NT1103A - Remote Control Keyfob Transmitter, Single Channel 866mHz

NT1103A - Remote Control Keyfob Transmitter, Single Channel 866mHz Features: Single Channel Fitted with Replaceable Long Life Lithium Battery Up / Stop / Down Buttons Front Sliding cover to prevent accidental operation of the shutter Chrome Finish Keyfob clip Product Codes: ...

View More
NT1105 - Remote Control / Receiver 10a 230v Ac with External Light & Manual Switch Functions

NT1105 - Remote Control / Receiver 10a 230v Ac with External Light & Manual Switch Functions

NT1105 - Remote Control / Receiver 10a 230v Ac with External Light & Manual Switch Functions Features: Standard Terminals Accepts up to 20 Fob Handsets Suitable for Motors with loading capacity up to 1000w Key Fob Compatible Deadman On/Off Function Separate External Light...

View More
NT1106 - Remote Control / Receiver  10a 230v Ac with Group Controller 2 Way & Manual Switch Function

NT1106 - Remote Control / Receiver 10a 230v Ac with Group Controller 2 Way & Manual Switch Function

NT1106 - Remote Control / Receiver  10a 230v Ac with Group Controller 2 Way & Manual Switch Function Features: Suitable for Motors with loading up to 600w per output Remote Control compatible Will accept NT1117 Wireless Switch & NT1012 Wireless Handset (Not Included) ...

View More
NT1107 - Intelligent Garage Door Controller with External Light Function, Safety & Switch Functions

NT1107 - Intelligent Garage Door Controller with External Light Function, Safety & Switch Functions

NT1107 - Intelligent Garage Door Controller with External Light Function, Safety & Switch Functions Features: Standard Terminals Accepts up to 20 Remote Devices Compatible with NT1103A Keyfob Transmitters (No supplied) Safety Edge Function Separate Low Volt 12-24v Dc P...

View More
NT1109 - Remote Control Group Command 3 Way 230v Ac with Manual Switch Function

NT1109 - Remote Control Group Command 3 Way 230v Ac with Manual Switch Function

Features: Standard Terminals 3 way Group Controller for either Individual or Group Control Compaitble with NT107 Keyfob & NT1012B Handset, NT1117 Wireless Switch (sold Separately) Manual Switch function (for each Motor) Local Manual Switch to operate group control Maste...

View More
NT1111 - Remote Control Receiver / Switch Combination 10a 240v with LCD Touch Screen

NT1111 - Remote Control Receiver / Switch Combination 10a 240v with LCD Touch Screen

NT1111 - Remote Control Receiver / Switch Combination 10a 240v with LCD Touch Screen Remote Control Receiver Can be used as Manual Switch only Compatible with NT1216 KeyFob, NT1117 Switch, NT1012, NT1018, NT1118, NT1119 Handset Transmitters (All sold separately) Accepts up to 2...

View More
NT1111B - Remote Control Receiver / Switch Combination 10a 240v with Double LCD Touch Screen

NT1111B - Remote Control Receiver / Switch Combination 10a 240v with Double LCD Touch Screen

 NT1111 - Remote Control Receiver / Switch Combination 10a 240v with Double LCD Touch Screen Will operate 2 Motors. Remote Control Receiver Can be used as Manual Switch only Compatible with NT1216 KeyFob, NT1117 Switch, NT1012, NT1018, NT1118, NT1119 Handset Transmitters (All sold s...

View More
NT1115 - Remote Control Wall Mounted Switch with 16 Channel, Wireless

NT1115 - Remote Control Wall Mounted Switch with 16 Channel, Wireless

NT1115 - Remote Control Wall Mounted Switch with 16 Channel, Wireless Up/down/stop function with LED channel display To operate motors up to 300w Clamp style terminals for ease of wiring Shock proof relays ideal for Tubular Motor operation Industry standard CPU ...

View More
NT1117 - Wireless Rocker Switch

NT1117 - Wireless Rocker Switch

NT1117 - Wireless Rocker Switch Features: Compatible with NT1004, NT1006, NT1008, NT1019, NT1103, NT1105 Controller / Receivers Will work in conjunction with NT1016 & NT1017 KeyFob Transmitters With Dead-man Function  Direction Change Function Simple to program  ...

View More
NT1117B - Remote Control Receiver / Switch Combination 10a 240v with Manual Switch Function

NT1117B - Remote Control Receiver / Switch Combination 10a 240v with Manual Switch Function

 NT1117B - Remote Control Receiver / Switch Combination 10a 240v with Manual Switch Function Features: Remote Control Receiver Can be used as Manual Switch only Compatible with NT1216 KeyFob, NT1117 Switch, NT1012, NT1018, NT1118, NT1119 Handset Transmitters (All sold separately) ...

View More

Leading Supplier of Remote Control products for Doors

 

Remote Control

NVM offer an extensive range of Remote Control options for Industrial Doors, Roller Shutter Doors, Garage Doors, Rapid Doors, Sectional Doors, Automatic Entrance Systems and Gate Operators.

Our range of Transmitters are available in Rolling or Single Code, Multi-Channel or Single Channel options and are designed to suite every application.

Remote Control Transmitters are available as Switches, KeyFobs, Handsets or Transponders and our Transponders are available as either Cards or Tags.

4 Way & 2 Way Remote Control Panels are available from stock and offer an additional Manual Switch function.

Our range of Remote Control Receivers include Panels for Industrial Doors, Roller Shutter Doors, Garage Doors, High Speed Doors, Sectional Doors, Automated Entrance Systems and Gate Operators.

Panels are available from stock with External Light, Manual Switch, Variable Run Timer & Timed Return functions, and include an array of Safety options, to suit both Single Phase and 3 phase Operators.

Our Garage Door Range offer Integral Lights, Monitored Safety Edge functions for either Optical or Resisitive systems and Manual Switch functions.