New Products

Latest Products

NV116 - Platewheel - 60T x ½" Pitch

NV116 - Platewheel - 60T x ½" Pitch

  NV116 - Platewheel 60T x ½" Pitch Product Codes: NV116 --- Platewheel - 60T x 1⁄2" - 17⁄8" Bore - 4 Holes NV116A - Platewheel - 60T x 1⁄2" - 17⁄8" Bore - 3 Holes NV116B - Platewheel - 60T x 1⁄2" - 17⁄8" Bore NV116C - Platewheel - 60T x 1⁄2" - 1" Bore ...

NT9212 - Crown & Adaptor - 120mm Ø for 127mm Tube 5”x 10swg to suit 92mm Motors

NT9212 - Crown & Adaptor - 120mm Ø for 127mm Tube 5”x 10swg to suit 92mm Motors

NT92* - Crown & Adaptor - 120mm Ø for 127mm Tube 5”x 10swg to suit 92mm Motors NT9212 - Crown & Adaptor - 120mm Round (5"x 10swg), S Series & M Series Supplied as a set with 1no Limit Crown & 1no Drive Adaptor.(except NT9294*)  ...

NF8004 - Flange Motor Bracket Pack for 800kg Motor & Shutters up to 6000mm H

NF8004 - Flange Motor Bracket Pack for 800kg Motor & Shutters up to 6000mm H

  NF8004 - Bracket Pack, for 800kg Motor. 6.00 Metre Max Shutter Height 4:1 Ratio Bracket Pack Kits (See Chart for Maximum Lift and Speed variations) NF8004B - Bracket Pack, for 800kg Motor, 6.00 Metre Max Shutter Height Pack Includes: Drive End Plate 590mm H x 350mm...

SDK942 - Aprimatic Additional Photocell Kit Automatic Sliding Door

SDK942 - Aprimatic Additional Photocell Kit Automatic Sliding Door

SDK942 - Aprimatic Additional Photocell Kit Automatic Sliding Door Must be used in conjunction with SDK941 Photocell & Panel Kit              ...

SDC802 - 800 Series - Aprimatic Basic Programmer

SDC802 - 800 Series - Aprimatic Basic Programmer

SDC802 - 800 Series - Aprimatic Basic Programmer KIBO BASIC programmer and Function Control for SDSK800 SERIS Automatic Swing Doors Features Funtion Settings for Open, Close, Lock, Exit Only or Push & Go Manual Maunal Operation Password Protected Set-up up to 4 Daily Events ...

NV112* - Chainwheel - Cast - 12” Ø Rim

NV112* - Chainwheel - Cast - 12” Ø Rim

NV112* - 12" Malleable Cast Chainwheel supplied complete with either 1" or 25mm bush. NV112C 12" Chainwheel c/w 16 Tooth Sprocket 25mm Bush NV112S 12" Chainwheel c/w 16 Tooth Sprocket ...

NV275 - T Bolt M6 x 55.5mm

NV275 - T Bolt M6 x 55.5mm

NV275 T Bolt 8mm x 55.5mm Long with M6 Thread Material: Mild Steel Finish: Zinc Plated Dims: 55.5mm O/All x 7.9mm Ø Body 44mm with 9mm x 7.9mm Ø Thread Head: 16mm x 2.5mm x 8mm ...

NGO812 - LED GARDEN LIGHTS UPLIGHTER (PAIR) for Automatic Gates

NGO812 - LED GARDEN LIGHTS UPLIGHTER (PAIR) for Automatic Gates

NGO812 - LED GARDEN LIGHTS DOWNLIGHTER (PAIR) for Automatic Gates Product Codes: NGO812 - LED GARDEN LIGHTS UP-LIGHTER (PAIR) BLACK for Automatic Gates NGO813 - LED GARDEN LIGHTS UP-LIGHTER (PAIR) WHITE for Automatic Gates Features: Cold White LED Light Strips Can be ins...

DLS103 - Bespoke Louvre Personnel Doors - LPS 1175 Certified - Made to Measure

DLS103 - Bespoke Louvre Personnel Doors - LPS 1175 Certified - Made to Measure

DLS103 - Bespoke Louvre Personnel Doors - LPS 1175 Certified - Made to Measure Every door is custom made and built for strength and lasting construction. Personnel Doors Leaf configurations can be: Single Leaf Double Leaf Leaf and a Half Transoms Locking Options are: ...

NV062 - Spring Block - Cast - 6" Tube

NV062 - Spring Block - Cast - 6" Tube

NV062 - Spring Block - Cast - 6" Tube 168.2mm Ø Technical Details: Grey Cast Iron Machined O/D Machined Bore Plain Bore, Clear Bore or Bushed 4 Lugs Boss both sides Ribbed Boss one side   Product Codes: NV062A - SPRING BLOCK - 6" - 155mm x 1.1/4" BORE...

SDS004 - Microwave Sensor (24GHz)

SDS004 - Microwave Sensor (24GHz)

Power: AC/DC 12-36v Frequency: 10.525ghz Protection Level IP54 Weight: 195gms Size: 110mm x 64mm x 42mm Motion Detection only Chip Brand: Innocent Germany         ...

DHC002 - Ryobi 3550 - Door Closer

DHC002 - Ryobi 3550 - Door Closer

DHC002 - Ryobi 3550 - Door Closer The Royobi 3550 is the Heavy Duty brother to the D-2550 Door closer. The 3550 is Fire Certified but will allow up to 1500mm Leaf width and 150kgs Leaf Weight Technical Details: Finish: Silver Optional Hold Open: Between 70 and 180 degrees Optional D...

NE130 - Safety Edge Rubber for Industrial Roller Shutters (For Sectional Doors) Use with NE730

NE130 - Safety Edge Rubber for Industrial Roller Shutters (For Sectional Doors) Use with NE730

NE130 - Safety Edge Rubber for Industrial Roller Shutters Safety Edge Rubber - 33mm x 35mm - Track Type (Sectional Doors) Features: Copper Embedded Rubber for Resistive Safety Edge Requires Aluminuim Track (Available) Available in up to 30 metre rolls. Rigid "T" Section for smooth ...

NV084 - Drive Pinion - Steel - 12T x 5DP

NV084 - Drive Pinion - Steel - 12T x 5DP

NV084 - Drive Pinion - Steel - 12T x 5DP Technical Details: Manufactured to BS 436 Machined Faced Machined Bored (See Product List for sizes) Machined Gearcut (See Product List for Pitch & Tooth Thickness) Machined Keyway (See Product List for Bore details) Material Used:...

NV326 - Pinion/Sprocket Assembly - Steel - 12T x 5 DP Pinion & 19t x ½” x ⁵⁄₁₆” Pitch Sprocket for Double Reduction Sets

NV326 - Pinion/Sprocket Assembly - Steel - 12T x 5 DP Pinion & 19t x ½” x ⁵⁄₁₆” Pitch Sprocket for Double Reduction Sets

NV326 - Pinion/Sprocket Assembly - Steel - 12T x 5 DP Pinion & 19t x ½” x ⁵⁄₁₆” Pitch Sprocket for Double Reduction Sets Technical Details: Manufactured to BS 436 Machined Faced (See product List for gear Widths) Machined Bored (See Product List for sizes) Machined Gearcut (See Pr...

NF3006 - 3 Phase In-Line Fire Shutter Flange Motor

NF3006 - 3 Phase In-Line Fire Shutter Flange Motor

NF3006 - 3 Phase In-Line Fire Shutter Flange Motor Features: In-Built Clutch Spring for connection to Solenoid Controlled Descent Pre-Wired with 3 phase Plug Pre-Wired with 3 Button Station Impulse / Deadman Function  ...