NVM Motors - High Quality Motors

Leading supplier of NVM Motors products

ELB059 - Fixing Plate - Steel - Top Hat Style with Tear Drop Holes for NT59 Tube Motors

ELB059 - Fixing Plate - Steel - Top Hat Style with Tear Drop Holes for NT59 Tube Motors

ELB059 - Fixing Plate - Steel - Top Hat with Tear Drop Holes for NT59 Tube Motors Technical Details: Mild Steel Tear Drop Holes for Fixing Screws Suits NT59 Tubular Motors S Series & M Series. Supplied with full set Zinc Plated Fixing Screws Enables quick change o...

ELF053A - Fixing Plate - Steel - Universal Plate for NT45 & NT59 Tube Motors

ELF053A - Fixing Plate - Steel - Universal Plate for NT45 & NT59 Tube Motors

ELF053A - Fixing Plate - Steel - Universal Plate for NT45 & NT59 Tube Motors Technical Details: Mild Steel Zinc Plated Countersunk Holes for Fixing Screws Suits NT45 & NT59 Tubular Motors all Series. Allows 45°, 90°, 135° or 180° installation of the motor to suit Endpla...

ELF053N - Fixing Plate - Steel - Universal Plate for NT45 & NT59 Tube Motors

ELF053N - Fixing Plate - Steel - Universal Plate for NT45 & NT59 Tube Motors

ELF053N - Fixing Plate - Steel - Universal Plate for NT45 & NT59 Tube Motors Technical Details: Mild Steel Zinc Plated Countersunk Holes for Fixing Screws Suits NT45 & NT59 Tubular Motors all Series. ...

ND3150 - NVM Sectional Door Drive - 3 Phase, Mechanical Limits, Built-On Starter

ND3150 - NVM Sectional Door Drive - 3 Phase, Mechanical Limits, Built-On Starter

ND3150 - NVM Sectional Door Drive - 3 Phase, Mechanical Limits, Built-On Starter Includes Torque Bracket Toggles Low Level Manual-Over-ride Low Level De-Clutch 3 Phase 415v 25.4mm Ø (1" Bore) Hollow Shaft with ¼" Keyway Built-On Starter 3 Button Station Up/Stop/Down ...

NDC203 - NVM Control Panel 415v 3 Phase for Direct Drives

NDC203 - NVM Control Panel 415v 3 Phase for Direct Drives

The NDC203 Control Panel is designed to operate with the ND3500 Series of Direct Drive Motors. The Panel operates on 3 phase 380/415v and has a range of built-in functionalities including Deadman Up / Down - On / Off, Safety Edge, Photocell & Light Barrier, Manual Switch & Remote Control....

NDD4* - NVM Direct Drive Motor Kits

NDD4* - NVM Direct Drive Motor Kits

NVM offer a range of Direct Drive Motor Kits to suit any Tube size and shutter height. If you cant see the kit you need, pleae contact the office NDD* NVM Direct Drive Motor Kits NDD4094 - DIRECT DRIVE - 500nm - 3ph Motor Kit with 94mm Discs NDD4120 - DIRECT DRIVE - 500nm - 3...

NDF100 - Flange Motor Adaptor to suit ND3150B Motor

NDF100 - Flange Motor Adaptor to suit ND3150B Motor

NDF100 - Flange Motor Adaptor to suit ND3150B Motor The Aluminium Adaptor is fitted with 1" Keywayed Shaft and Bearing designed to fix to the ND3150 Sectional Motor, to convert the ND3150 from a Sectional Door Drive to a Flange Drive motor. Features The Flange Motor Adaptor is supplied a...

NDF203 - Remote Control Keyfob Transmitter for Direct Drive Control Panel

NDF203 - Remote Control Keyfob Transmitter for Direct Drive Control Panel

NDF203 - Remote Control Keyfob Transmitter for Direct Drive Control Panel. Features Single Channel Up/Stop/Down Buttons Rolling Code Technology with more than 5 million codes. Chrome Finish ...

NDF315 - NVM Flange Motor with Adaptor - 3 Phase 415v 150nm, with Built-on Starter and 3 Button Station

NDF315 - NVM Flange Motor with Adaptor - 3 Phase 415v 150nm, with Built-on Starter and 3 Button Station

NDF315 - NVM Flange Motor with Adaptor - 3 Phase 415v  with Built-on Starter and 3 Button Station Features: Built-on Starter Pre-Wired with 6 metres Cable and 3 Phase Plug Pre-Wired with 6 metres Cable and 3 button Station Low Voltage to 3 Button Station Automatic De-Clutch, (N...

NF0010 - Remote Control - c/w 2 Fobs, suit NF100* & NF300* Series In-Line Flange Motors

NF0010 - Remote Control - c/w 2 Fobs, suit NF100* & NF300* Series In-Line Flange Motors

NF0010 - REMOTE CONTROL - c/w 2 Fobs, suit NF100* & NF300* Series Motors Features: N/O Terminal Pre-Wired for Flange Motors 433MHz  ...

NF0010B - Fob Handset, suit NF0010 Remote Control for NF100* & NF300* Series In-Line Flange Motors

NF0010B - Fob Handset, suit NF0010 Remote Control for NF100* & NF300* Series In-Line Flange Motors

NF0010B - Fob Handset, suit NF0010 Remote Control for NF1* & NF3* Series In-Line Motors Features: 433MHz Rolling Code Technology Sliding Cover 30m Range  ...

NF0011 - Photocells - Send & Receive, Set, suit NF100* & NF300* Series In-Line Flange Motors

NF0011 - Photocells - Send & Receive, Set, suit NF100* & NF300* Series In-Line Flange Motors

NF0011 - Photocells - Send & Receive, Set, suit NF100* & NF300* Series In-Line Motors Features: Send & Receive 16 Metre Range Pre-Wired for NF100* & NF300* In-Line Flange Motors ...

NF0025 - Fusible Link

NF0025 - Fusible Link

NF0025 Fusible Link to suit NF1 / NF3 Series Type 1 NF0026 Fusible Link to suit NF1 / NF3 Series Type 2 ...

NF0032B - 3 Button Station

NF0032B - 3 Button Station

NF0032B - 3 Button Station Up/Stop/Down...

NF0033* - Platewheel, suit NF100* & NF300* Series Bracket Packs

NF0033* - Platewheel, suit NF100* & NF300* Series Bracket Packs

NF0033* - Platewheel, suit NF100* & NF300* Series Bracket Packs NV0033 --- Platewheel - 36T x 5/8" Pitch - 58mm Bore Suits 800kg Bracket Pack NV0033B - Platewheel - 45T x 5/8" Pitch - 35mm Bore Suits 500kg Bracket Pack NV0033C - Platewheel - 45T x 5/8" Pitch - 58mm Bore Suits 800k...

NF0041 - 3 Phase Screwless Plug

NF0041 - 3 Phase Screwless Plug

NF0041 - 3 Phase Screwless Plug 16a, 415v IP44 Rated, 3P+N+E...

NF0042 - 3 Phase Socket

NF0042 - 3 Phase Socket

NF0042 - 3 Phase Socket 16a, 415v IP44 Rated, 3P+N+E...

NF100* - Single Phase In-Line Flange Motor

NF100* - Single Phase In-Line Flange Motor

NF100* Single Phase In-Line Flange Motor Supplied with: Pre-Wired Plug Pre-Wired 3 Button Station Low Level Manual Over-ride Low Level Haul Chain Reversible Handing Motor Ratings: NF1002 - Single Phase In-Line Flange Motor, Max 200kg Lift NF1003 - Single Phase In-Line F...

NF300* - 3 Phase In-Line Flange Motor

NF300* - 3 Phase In-Line Flange Motor

NF300* 3 Phase In-Line Flange Motor Supplied with: Pre-Wired Plug Pre-Wired 3 Button Station Low Level Manual Over-ride Low Level Haul Chain Reversible Motor Ratings: NF3002 - 3 Phase In-Line Flange Motor, Max 200kg Lift NF3003 - 3 Phase In-Line Flange Mo...

NF3006 - 3 Phase In-Line Fire Shutter Flange Motor

NF3006 - 3 Phase In-Line Fire Shutter Flange Motor

NF3006 - 3 Phase In-Line Fire Shutter Flange Motor Features: In-Built Clutch Spring for connection to Solenoid Controlled Descent Pre-Wired with 3 phase Plug Pre-Wired with 3 Button Station Impulse / Deadman Function  ...

NF3010 - 3 Phase In-Line Flange Motor with up to 1000kg Lift Capacity

NF3010 - 3 Phase In-Line Flange Motor with up to 1000kg Lift Capacity

NF3010 - 3 Phase In-Line Flange Motor with up to 1000kg Lift Capacity Supplied with: Pre-Wired Plug Pre-Wired 3 Button Station Low Level Manual Over-ride Low Level Haul Chain Reversible Technical specification:  ...

NF3015 - 3 Phase In-Line Flange Motor with up to 1500kg Lift Capacity

NF3015 - 3 Phase In-Line Flange Motor with up to 1500kg Lift Capacity

NF3015 - 3 Phase In-Line Flange Motor with up to 1500kg Lift Capacity Supplied with: Pre-Wired Plug Pre-Wired 3 Button Station Low Level Manual Over-ride Low Level Haul Chain Reversible Technical specification:  ...

NF5003 - Flange Motor Bracket Pack for 500kg Motor & Shutters up to 4500mm H

NF5003 - Flange Motor Bracket Pack for 500kg Motor & Shutters up to 4500mm H

NF5003 - Flange Motor Bracket Pack for 500kg Motor & Shutters up to 4500mm H Standard Bracket Pack Kits NF5003 - Bracket Pack, for 500kg Motor. 4.50 Mtr Max Shutter Height 4:1 Ratio Bracket Pack Kits (See Chart for Maximum Lift and Speed variations) NF5003B - Bracket Pac...

NF5004 - Flange Motor Bracket Pack for 500kg Motor & Shutters up to 6000mm H

NF5004 - Flange Motor Bracket Pack for 500kg Motor & Shutters up to 6000mm H

  NF5004 - Flange Motor Bracket Pack for 500kg Motor & Shutters up to 6000mm H Standard Bracket Pack Kits NF5004 - Bracket Pack, for 500kg Motor. 6.00 Mtr Max Shutter Height 4:1 Ratio Bracket Pack Kits (See Chart for Maximum Lift and Speed variations) NF5004B - Bracke...

NF7* - Additional Disks

NF7* - Additional Disks

Dummy End Discs: NF7012B DUMMY DISC - 30.2mm I/D x 120mm O/D, x 6mm, SUITS 300, 500 NF7097B DUMMY DISC - 30.2mm I/D x 97mm O/D SUITS 300, `500 NF7029B DUMMY DISC - 30mm I/D x 129mm O/D SUITS 500 NF7094B DUMMY DISC - 30mm I/D x 94mm O/D SUITS 300, 500 NF7929B DU...

NF8004 - Flange Motor Bracket Pack for 800kg Motor & Shutters up to 6000mm H

NF8004 - Flange Motor Bracket Pack for 800kg Motor & Shutters up to 6000mm H

  NF8004 - Bracket Pack, for 800kg Motor. 6.00 Metre Max Shutter Height 4:1 Ratio Bracket Pack Kits (See Chart for Maximum Lift and Speed variations) NF8004B - Bracket Pack, for 800kg Motor, 6.00 Metre Max Shutter Height Pack Includes: Drive End Plate 590mm H x 350mm...

NF8006 - Flange Motor Bracket Pack for 800kg Motor & Shutters up to 8000mm H

NF8006 - Flange Motor Bracket Pack for 800kg Motor & Shutters up to 8000mm H

NF8006 - Flange Motor Bracket Pack for 800kg Motor & Shutters up to 8000mm H Standard Bracket Pack Kits NF8006 - Bracket Pack, for 800kg Motor. 8.00 Metre Max Shutter Height 4:1 Ratio Bracket Pack Kits (See Chart for Maximum Lift and Speed variations) NF8004B - Bracket Pack...

NFK1* -  Single Phase In-Line Flange Motor Kits

NFK1* - Single Phase In-Line Flange Motor Kits

Standard Kits: NFK1320 FLANGE KIT - 1 PHASE, 300kg LIFT, 3.0Mtr PLATES, 120mm DISCS NFK1394 FLANGE KIT - 1 PHASE, 300kg LIFT, 3.0Mtr PLATES, 94mm DISCS NFK1397 FLANGE KIT - 1 PHASE, 300kg LIFT, 3.0Mtr PLATES, 97mm DISCS NFK1520 FLANGE KIT - 1 PHASE, 500kg LIFT, 4.5Mtr...

NFK3* -  3 Phase In-Line Flange Motor Kits

NFK3* - 3 Phase In-Line Flange Motor Kits

Standard Kits: NFK3320 FLANGE KIT - 3 PHASE, 300kg LIFT, 3.0Mtr PLATES, 120mm DISCS NFK3394 FLANGE KIT - 3 PHASE, 300kg LIFT, 3.0Mtr PLATES, 94mm DISCS NFK3397 FLANGE KIT - 3 PHASE, 300kg LIFT, 3.0Mtr PLATES, 97mm DISCS NFK3520 FLANGE KIT - 3 PHASE, 500kg LIFT, 4.5Mtr...

NFK36* - 3 Phase 600kg In-Line Fire Shutter Kit

NFK36* - 3 Phase 600kg In-Line Fire Shutter Kit

NFK36* - 3 Phase 600kg In-Line Fire Shutter Kit In-Line Flange Motor pre-wired with Plug and including Low Level Haul Chain, 3 Button Station Drive Endplate Dummy Endplate 4 Hole Flange Bearing Shaft with Keyway to suit Safety Brake Drive Disc Set Dummy End Disc Set Platewheel ...

NT0040A - ExtenUNiversal Joint - 500mm Long x 7mm Hex Bar & Rigid Eye

NT0040A - ExtenUNiversal Joint - 500mm Long x 7mm Hex Bar & Rigid Eye

NT0040A - ExtenUNiversal Joint - 500mm Long x 7mm Hex Bar & Rigid Eye Designed for Tube Motors with Manual Override. Enables the operation of a Tubular motor when the power fails in cases of Emergency. The Manual Override also requires a Crank Handle to hook onto the rigid Eye. See product co...

NT0042 - Crook Handles

NT0042 - Crook Handles

Crook Handles are used when a tube motor has a Manual Override function. The Tube Motor requires a Rigid Eye to be fitted to the Manual Override. The Crook Handle is then hooked onto the Rigid Eye which is placed into the Manual Override. Crook Handles are also known as Crank Handles, Winding Han...

NT0044 - Standard Rigid Eye - 185mm Long x 7mm Hex Bar

NT0044 - Standard Rigid Eye - 185mm Long x 7mm Hex Bar

NT0044 - Standard Rigid Eye - 185mm Long x 7mm Hex Bar Designed for Tube Motors with Manual Override. Enables the operation of a Tubular motor when the power fails in cases of Emergency. The Manual Override also requires a Crank Handle to hook onto the rigid Eye. See product code NT0042 Techni...

NT0044B - Extended Rigid Eye - 225mm Long x 7mm Hex Bar

NT0044B - Extended Rigid Eye - 225mm Long x 7mm Hex Bar

NT0044B - Extended Rigid Eye - 225mm Long x 7mm Hex Bar Designed for Tube Motors with Manual Override. Enables the operation of a Tubular motor when the power fails in cases of Emergency. The Manual Override also requires a Crank Handle to hook onto the rigid Eye. See product code NT0042 Techn...

NT0044C - Extended Rigid Eye - 325mm Long x 7mm Hex Bar

NT0044C - Extended Rigid Eye - 325mm Long x 7mm Hex Bar

NT0044C - Extended Rigid Eye - 325mm Long x 7mm Hex Bar Designed for Tube Motors with Manual Override. Enables the operation of a Tubular motor when the power fails in cases of Emergency. The Manual Override also requires a Crank Handle to hook onto the rigid Eye. See product code NT0042 Techn...

NT0044F - Extended Rigid Eye - 225mm Long x 8mm Hex Bar

NT0044F - Extended Rigid Eye - 225mm Long x 8mm Hex Bar

NT0044F - Extended Rigid Eye - 225mm Long x 8mm Hex Bar Designed for Tube Motors with Manual Override. Enables the operation of a Tubular motor when the power fails in cases of Emergency. The Manual Override also requires a Crank Handle to hook onto the rigid Eye. See product code NT0042 Techn...

NT0045 - Star Fixing Bracket for NT45 Tube Motors

NT0045 - Star Fixing Bracket for NT45 Tube Motors

NT0045 - Star Fixing Bracket for NT45 Tube Motors Technical Details: Zinc Plated Size: 90mm x 40mm x 150mm Star Size: 21mm Max Diagonally 4no Drilled Holes 9mm Ø and 2no Holes Drilled & Tapped M8 Suit NT45 Manual Override Motors only ...

NT0045S - Star Fixing Bracket for NT45S Non-Manual Tube Motors

NT0045S - Star Fixing Bracket for NT45S Non-Manual Tube Motors

NT0045S - Star Fixing Bracket for NT45S Non-Manual Tube Motors Technical Details: Zinc Plated Size: 70mm x 30mm x 100mm Star Size: 13mm Max Diagonally 2no Slotted Fixing Holes, Centre Position Suit NT45s Non Manual Override Motors only ...

NT0046 - Low Level Manual Winding Kit

NT0046 - Low Level Manual Winding Kit

NT0046 - Low Level Manual Winding Kit Designed to ernable access through a garage door when there is no power to the motor. Winding Handles can used from both inside and outside. The Outside handle is connected through a connection box that is lockable for securuity. Technical Details: T...

NT0059 - Star Fixing Bracket for NT59 Tube Motors

NT0059 - Star Fixing Bracket for NT59 Tube Motors

NT0059 - Star Fixing Bracket for NT59 Tube Motors Technical Details: Zinc Plated Size: 100mm x 40mm x 18mm. Star Size: 20mm Max diagonally 4no Fixing holes Drilled 6mm Ø ...

NT45* - M Series Tubular Motor with Twizzle Limits

NT45* - M Series Tubular Motor with Twizzle Limits

The NT45 "M" Series Tube Motor is only available with Manual Override option. Manual Override motors are supplied with a Rigid Eye as standard. Extended Rigid Eyes are also available. See Product Code NT0044. the operation of a Tubular Motor using the Manual Override also requires a Crank Ha...

NT45* - PB Series Tubular Motor with Push Button Limits

NT45* - PB Series Tubular Motor with Push Button Limits

The NT45 "PB" Series Tube Motor is only available with Manual Override option. Manual Override motors are supplied with a Rigid Eye as standard. Extended Rigid Eyes are also available. See Product Code NT0044. the operation of a Tubular Motor using the Manual Override also requires a Crank Handle...

NT45* - S Series Tubular Motor with Twizzle Limits

NT45* - S Series Tubular Motor with Twizzle Limits

The NT45 "S" Series Tube Motor is available with Manual Override or Non Manual Override options. Manual Override motors are supplied with a Rigid Eye as standard. Extended Rigid Eyes are also available. See Product Code NT0044. the operation of a Tubular Motor using the Manual Override also requi...

NT4560* - Crown & Adaptor - 57mm for Octagonal Tube 60mm x 1.5mm Wall to suit 45mm Motors

NT4560* - Crown & Adaptor - 57mm for Octagonal Tube 60mm x 1.5mm Wall to suit 45mm Motors

NT4560* - Crown & Adaptor - 57mm for Octagonal Tube 60mm x 1.5mm Wall to suit 45mm Motors S Series NT4560 - Crown & Adaptor - 60mm Octagonal, Suits NT45* S Series M Series NT4560B - Crown & Adaptor - 60mm Octagonal, Suits NT45* M Series PB Series NT456...

NT4568 - Crown & Adaptor - 7mm Ø Tube for 45mm Motors

NT4568 - Crown & Adaptor - 7mm Ø Tube for 45mm Motors

NT4568 - Crown & Adaptor - 68mm Ø Tube for 45mm Motors To suit 70mm Ø round Tube NT45* S Series Tube Motors NT4520   - 20nm Tube Motor with Manual Override NT4530   - 30nm Tube Motor with Manual Override NT4540   - 40nm Tube Motor with Manual Overrid...

NT4570* - Crown & Adaptor - 67mm for Octagonal Tube 70mm x 1.5mm Wall to suit 45mm Motors

NT4570* - Crown & Adaptor - 67mm for Octagonal Tube 70mm x 1.5mm Wall to suit 45mm Motors

NT4570* - Crown & Adaptor - 67mm for Octagonal Tube 70mm x 1.5mm Wall to suit 45mm Motors S Series NT4570 - Crown & Adaptor - 70mm Octagonal, Suits NT45* S Series M Series NT4570B - Crown & Adaptor - 70mm Octagonal, Suits NT45* M Series PB Series NT457...

NT4575* - Crown & Adaptor - 75mm Ø for 3” Tube for 45mm Motors

NT4575* - Crown & Adaptor - 75mm Ø for 3” Tube for 45mm Motors

NT4575* - Crown & Adaptor - 75mm Ø for 3” Tube for 45mm Motors S Series NT4575B - Crown & Adaptor - 75mm Round, Suits NT45* S Series M Series NT4575B - Crown & Adaptor - 75mm Round, Suits NT45* M Series  ...

NT4589 - Crown & Adaptor - 85mm Ø Tube for Deprat Tube 89mm x 2mm Wall to suit 45mm Motors

NT4589 - Crown & Adaptor - 85mm Ø Tube for Deprat Tube 89mm x 2mm Wall to suit 45mm Motors

NT4589 - Crown & Adaptor - 85mm Ø Tube for Deprat Tube 89mm x 2mm Wall to suit 45mm Motors S Series NT4589 - 89mm Deprat Adaptor M Series NT4589 - 89mm Deprat Adaptor Supplied as a Set. 1no Limit Crown, 1no Drive Adaptor...

NT4593 - Crown & Adaptor - 93mm Ø for 101.6mm SWS 4” Fluted Tube to suit 45mm Motors

NT4593 - Crown & Adaptor - 93mm Ø for 101.6mm SWS 4” Fluted Tube to suit 45mm Motors

NT4593 - Crown & Adaptor - 93mm Ø for 101.6mm SWS 4” Fluted Tube to suit 45mm Motors Supplied as a Set. 1no Limit Crown, 1no Drive Adaptor...

NT4594* - Crown & Adaptor - 94mm Ø for 101.6mm Tube 4”x 9swg to suit 45mm Motors

NT4594* - Crown & Adaptor - 94mm Ø for 101.6mm Tube 4”x 9swg to suit 45mm Motors

NT4594* - Crown & Adaptor - 94mm Ø for 101.6mm Tube 4”x 9swg to suit 45mm Motors S Series NT4594 - Crown & Adaptor - 94mm Round, Suits NT45* S Series M Series NT4597B - Crown & Adaptor - 94mm Round, Suits NT45* M Series PB Series NT4597PB - Crown &...